Basic Tips About Maintenance of Tools and Equipment

Maintenance of Tools and Equipment

Passionate craftsmen do not just understand something about their work. They also know that they can only achieve good results with high quality and correct maintenance of tools and equipment. This not only looks ugly – it reduces the utility value or even makes the tools unusable. Yet, if rust-prone tools such as saws. wrench, jigsaw, glue gun or hammers are appropriately maintained and stored, rust is a thing of the past. In the following, you will learn how to care for your tool and protect it from rust.

Maintenance of Tools and Equipment


  • Tip # 1: Choose the right repository

Rust on exposed metal surfaces always forms when two factors come together: moisture and air. Now it is difficult, if not impossible, to keep tools in a real vacuum.

But on moisture, you have to select the right place. Thus, choose a room where tools and equipment keep dry and clean. Suitable for this are:

  • Tight closing garages
  • Dry basement rooms
  • Insulated roof and storage rooms
  • Expired scales

If you have no larger rooms available, you can also fall back on a wooden box. The main thing is to keep the tools dry and clean! The devices, properly handled, packaged and stored in a dry place, will be there for you for a long time.

  • Tip # 2: Clean tools immediately

Especially during woodworks and gardening, your tools come into contact with dirt, wet leaves, and other wet spots. That in itself is not bad – high-quality tools can handle that easily!

However, it is essential that you clean them immediately after completing your work. While it is true that this is a less enjoyable part of your hobby or profession, your wallet will thank you!

After each use, the tools should be returned to their original place. Do not throw the device into the box or the shelf, but at least clean it up so that you can use it again the next time. When cleaning, you should pay attention to the following care and maintenance of tools and equipment:

  • Dirt residues are completely removed!
  • Light soiling can be easily removed with a damp cloth. If you are more persistent, you can also use a cleaning brush and a cleaning tool.
  • Also, be sure to thoroughly clean hard-to-see joints or other hidden surfaces as well.
  • With the multifunctional oil WD40 * you can solve rust, and it also offers corrosion protection, which holds several months depending on the storage. As an alternative home remedy, you can put rusty tools (without plastic parts) for a few days in cola and then rinse thoroughly. But, this does not provide more protection. Again, the tip is of course only for metallic tools and not for electric appliances.

Anyone who immediately cleans their tools and their equipment saves a lot of maintenance work. As a rule, a damp cloth is enough to remove dirt. For stubborn dirt, cleaning brushes and cleaning agents help. If the tool consists of several elements with joints, the hidden surfaces and moving parts should also be thoroughly cleaned of dirt. These places are predestined for rust formation.

Video Credit:- milanmastracci

  • Tip # 3: Maintain and Store Tools Properly

Did you clean the tools carefully and thoroughly? Do you know about the correct maintenance of tools and equipment? Then the most important work is already done. All that matters now is to protect your equipment and accessories from rust in the long term – with a light film of oil.

For this, we recommend a simple machine oil, as you might know from oiling your sewing machine or bicycle chain. However, do not overdo it when applying – in some cases, just a few drops of oil are enough to ensure lasting rust protection.

Sawing and shearing are not prone to rust in the long term, but you can wrap them in the lightly oiled paper – for sure. But please do not forget that it depends on permanently dry storage.

Also, put a piece of chalk or charcoal in the storage box. These absorb the humidity of the environment and add to the fact that you will not find anything rusty in your toolbox.

With these mentioned tips it is very easy to protect the tool from rust permanently. Thus, you will enjoy your equipment and utensils for a very long time.

Video Credit:- Next Luxury

  • Tip # 4: Repair

Repairing is another essential tips for maintenance tools and equipment. Keep checking your tools and repair it immediately which is quickly fixable.

If the machine goes out during work, usually a cable break is the cause. Especially with cheap tools, the cable is not sufficiently flexible and anyway too short.

The other reason may be a broken switch. Mostly the defect lies in the power supply.

Take care of your safety during such work. You should always hire a specialist. If the machine still has a warranty, a defect is not a question anyway.

Conclusion


Depending on the material of your tool different care tips are to be applied. The operating instructions for the devices contain all the information. There the manufacturers give exact information to your device.

Also, it is essential to take a few more actions. Already at the purchase, it makes sense to use maintenance-friendly tools.

Cleaning with a cloth and lubricating or lubricating moving parts is usually sufficient. Carefully handle your tool. Look for functionality at regular intervals. Maintaining uptime ensures you a successful project completion, and you have a lot of fun with your device.

It is also about your safety because you prevent accidents.

Leave a Comment

Your email address will not be published. Required fields are marked *

best circular saw guide rail

Best Circular Saw Guide Rail Guides

Read More →
Using Demolition Hammer to break the rock

Best Demolition Hammer Reviews

Read More →
Cordless Jigsaw tools

Best Cordless Jigsaw Tools Reviews

Read More →

Sign up for our Newsletter

Get all the latest articles, tools guide right at your inbox.