Which type of saw is best for you? This is a commonly asked question by the woodworkers or saw users. My recommendation is the sidewinder will likely be the common circular saw for most people. Unless you are planning on doing a lot of construction and heavy-duty cutting, you won’t need a worm drive. This is particularly true if the saw will be your first one. The Sidewinders are lighter, less expensive and a good one can give you decades of service. You should plan to spend somewhere between $100 and $150. If you decide the worm gear is for you, plan to spend $150 to $200.
Some Key Features to Look for in a Circular Saw
- Accuracy Features – These features that help make your cuts straight and true every time.
- Left-Hand Blade – The overwhelming majority of the right-handed circular saw users find that a saw with the blade on the left makes it much easier to see the blade while cutting. This, in turns, makes it easier to follow the cut line. In fact, users rave about the feature, noting that the difference in cut visibility is night and day. Of course, if you’re left-handed, the opposite would hold true and you should consider a saw with a right-hand blade. Interestingly enough, it’s hard to find a sidewinder with a left-hand blade. However, you’re in luck because I’ve found two of them that get very high marks from consumers and professionals alike. More on this in a bit.
- Accurately Aligned Base Plate (also known as the “foot” or “shoe”) – The base of a circular saw is that rectangular piece of flat, smooth metal that rests against the surface of whatever is being cut. The base must be both parallel and perpendicular to the blade in order for your cuts to be straight. If the base is not parallel to the blade, you will not be able to follow a cut line accurately. If the base is not at a 90-degree angle to the blade, your cuts will not be straight vertically but will be cut at a slight angle. If that didn’t make sense to you, don’t worry about. The important thing is to keep an eye out for consumer complaints. If saw owners consistently complain that the saw won’t cut straight, run away screaming. On the other hand, if they rave about how straight the saw cuts, you have a potential winner.
- Easy-to-change Depth and Angle Adjustments – This is a convenience feature. Ideally, you want the saw to have levers or knobs that enable you to quickly make depth and angle changes.
- Easy-to-read Cutting Depth and Angle Marks – These are the guide marks that are used to adjust the depth of the cut and the angle of the cut respectively. You want these to be clear and easy-to-read so you can make needed adjustments quickly and accurately.
- Bevel Adjustments that Go Past 45 Degrees – This expands the spectrum of bevel cuts you are able to make.
- Spindle Lock – This is a convenience feature that helps make changing blades faster and easier. It is usually a button you push to lock the blade in place while you loosen the blade’s retaining bolt with a wrench.
- Ball Bearing Motor – A quality saw will have a motor with ball bearings instead of bushings. This makes for less friction, quieter operation and longer motor life.
Categories of a Circular Saw
In this article we will highlight about Circular saw as it has a high demand in the market and it is very helpful for cutting any plastic sheet, wood, metal, tiles, etc. If you are roaming around here and there asking the question What circular saw to buy, then you are at the right place to get your answer.
There are four basic categories of a circular saw. They are:
- Sidewinder or Inline saw
- Worm drive saw
- Cordless circular saw
- Mini or Trim circular saw
All of the saw has some common qualities in themselves such as their comfortable shape, portability, basic design structure, relatively high power. But the features which make them different from each other are:
Sidewinder or Inline Circular saw
Sidewinder or Inline Circular saw is popular among the people of its compact design, lightweight, power, and versatility. Blade of sidewinder saw is attached to the motor drive shaft directly. It makes it easy to use and handle.
Worm drive saw
The Worm drive saw is famous for its raw power which has a worm gear to circulate the power from the motor to the blade. This saw can cut hard material quickly with its raw power, but it is tough to handle sometimes if you do not have much practice.
Cordless circular saw
What circular saw without the cord is called cordless circular saw. As it runs without cord its power is less than another circular saw, but it is highly portable in nature, and you can go anywhere without thinking about electricity issues if you have powerful battery and way to recharge the battery.
Mini or trim circular saw
You can use the mini circular saw also known as the trim saw at any little kind of work. You can use it to wall paneling, cutting light material, fence board or low profile lumber.
Basic Tips for What Circular Saw to Buy
By this time, you must learn which circular saw you should buy according to your working purpose. There are a few things I am highlighting which you must know before buying a circular saw:
You should go for a better-designed tool which will be comfortable in your hands. People look for a saw which is lightweight and compatible with their works. Nowadays people find the device which is lightweight and sturdy at the same time. You need to determine which saw is best for me. This will depend on what kind of work you intend to do with your circular saw.
You should select a saw which has a cut line indicator. It is the most important feature of a circular saw. Cutline indicator helps you to cut anything accurately. You need not to mark anything before cutting or be conscious about the alignment of your cutting area.
Different shape of blade:
Most of the saws now come with various types of blades so that you can operate more tasks with one saw changing the different blades from time to time. Different shapes of blades allow you to cut tiny to large things starting from a sheet of paper to wooden log and even tiles.
If you are thinking of using your circular saw in more complicated works, you should check the bevel function of the circular saw before buying it. Bevel function is not required if you use your saw just for cutting plywood and trimming something lighter.
The guide rail is really essential if you want to do precise cut. The guide rail is really helpful to work with the circular saw more efficiently and easily. It increases the safety feature of the circular saw a well.
You also need to check the baseplate connection of your circular saw. If stamped aluminum baseplate drops it can be fixed easily whereas cast aluminum baseplate is tougher to fix if it falls hard. The fiber- reinforced plastic baseplate is ideal for a circular saw.
Depth adjustment lever:
There are three types of the lever: outboard lever, inboard lever, and rubber-covered or thick rounded lever. The outboard gear is easier to reach than other bar helping you to keep your trigger hand on the handle of the saw. The inboard lever ‘s hard to operate as it sometimes tucks between the blade guard and handles. The rubber-covered rounded bar is the finest lever to operate.
Shaft lock is the most important things to look at before buying a circular saw. If shaft lock does not work correctly, operating circular saw would be difficult.
Laser indicator helps to mark the area which would be cut through the line accurately. It is an automated laser indicator.
Video Credit – Howdini
What circular saw to buy is no more any hardest question. You can also read other comparisons with the circular saw to make it easier for you. You can now only determine which circular saw to buy and which will be the best match for your working criterion. You should also consider the budget and other facilities before buying any circular saw. Don’t get confused with different products in the market. Just find out the best match for you.